The size and the capacity of these equipments depend directly on the type and quantity of tooling. We have different sizes starting from 20 stations up to 80 stations either B type or D type tooling.

We also provide specially designed baskets (Punch & Dye holder) which helps to give maximum area of cleaning and easy handling. We ensure 100% drainage by providing tapered bottom with drainage. We have also introduced to provide Water jet gun for cleaning and rinsing of Ultrasonic tank from inside and prepare the tank for next usage or cycle. Our equipments are manufactured from S. S. 304 to meet stringent pharma requirement. The inside of the Ultrasonic Tank is mirror finish & argon ark welded with full buffing and smooth internal surfaces to avoid deposition of particle on the surface. High Power Ultrasonic Systems are also offered by us with reliable and durable guarantee to all over the globe.

Multi Stage Cleaners are preferred to avoid human intervention for the cleaning, rinsing and drying operation prior to storage with RPO. Multi stage cleaners are having different stages like

1
Ultrasonic Cleaning

2
Hot Water Rinsing

3
Hot Air Drying

4
Food Grade Oil Dipping or RPO ( Rust Preventing Operation )

We have developed and designed a long bed Ultrasonic Cleaners for rigid Lapro Scopes and Endo Scopes. It cleans various sizes of scopes up to 21” without dismantling the same and improves the life of the equipment considerably. Cleaning these instruments through Ultrasonic cleaners also helps to stop cross infections to the patients. Ultrasonic Cleaning is also being recommended by various forums in the interest of the patient’s safety.

Depending on the requirement, we have three different models suitable to meet every requirement (Private or Corporate )

Automatic cleaning & rinsing in one tank. No need to remove the basket.

Two separate inlets for cleaning solvent & DM water for final rinsing.

Easy to operate. No broken glass.

Water soluble cleaning concentrate, hence no use of chromic acid.

Rinsing process according to siphon principal.

Intensive, gentle and environment friendly.

Totally indigenous and prompt after sales service.

A Sonicator System is comprised of 3 major components: U/S Generator, Converter and Horn (also known as a probe). During operation, the probe's tip longitudinally expands and contracts. In liquid, the high freq vibration of the tip causes cavitation, the formation and violent implosion of microscopic bubbles. The implosion of thousands of cavitation bubbles releases tremendous energy in the cavitation field thus objects and surfaces within the cavitation field are processed. The probe tip diameter and power dictates the amount of sample that can be effectively processed. It is important to select the appropriate generator and probe to match the volume, viscosity and other parameters of each particular application. Particles size reduction for ultrasonic probe type as well as ultrasonicator by us since 2002. Manufacturers of Ultrasonic Homogenizer offered in variety of range with assurity of safety, security, quality, efficiency, reliability as well as durability.

The Ultrasonic Atomiser uses Ultrasonic energy (Low/Medium) to generate low velocity, gentle spray unlike the conventional atomizing nozzle which depends on pressure & high velocity motion to shear a fluid into small droplets. The fluid (Liquid) is dispensed to the atomizing probe by either gravity or low-pressure small pumps & atomize continuously or intermittently as per requirement. The sample can be accurately delivered to the target area & over spray is virtually eliminated thus, resulting in material savings. The atomizer can runs continuously or be programmed to pulse On & Off.

The rate of atomization depends within limits solely on the volume that is been delivered onto the atomizing surface & the frequency it operates. Typically higher the frequency, the lower the processing capability. With water the average droplet size is 50 microns and the minimum sample volume that can be effectively atomized is 2µl/sec. To optimize atomization, the viscosity below 50cps & solid concentration must be below 30%.

The atomization of liquids containing long-chained polymer molecules is problematic, even in diluted form, due to highly cohesive nature of the material. Drop size is primarily a function of frequency, and the higher the frequency, the smaller the drop diameter, E.g. : frequency 20 kHz the drop size is 100 microns & frequency is 40 KHz the drop size is 50 microns.